Oathsworn Heroes: Tardog Wolfskinner, Ogre vagabond

Back in 2013, Oathsworn had a kickstarter for a range of oldhammery heroes, with dwarves, halflings, and a few monsters like the efreet and shambling mound that I have painted earlier.

I am very slowly getting round to them, one at a time:

    

This is Tardog Wolfskinner, Ogre vagabond from that set. 

Full of that oldhammer character and charm.

 

Now if only I could remenber where I put the rest of those minis…

 

Tardog Wolfskinner, Ogre vagabond

from the Oathsworn Heroes KS (2013)

Oathsworn Miniatures

sculpted by Michael Lovejoy

white metal

40mm base

 

 

Painted so far this month: 36/31 target surpassed

Painted so far this year: 194 / 365. Just 171 to go

 

Oathsworn: Clan McFiggin’s Ancient McFiggin

Oathsworn’s fourth kickstarter project was Clan McFiggin, a set of 12 dwarf brewers, back in 2014.

Time to get this party started!

  

This is Ancient McFiggin, the eldest of the lot, and presumably prime taster for the brewery.

There is something strange going on with his mouth. Not sure what is supposed to be what, so I went for dentures. Possibly is should have been the upper lip. Whatever.

 

Ancient McFiggin

from the Clan McFiggin KS

Oathsworn Miniatures

Metal

30mm bases

 

 

Painted so far this month: 62 / 30.  

Painted so far this year: 147 / 365. Just 218 to go!

 

 

It’s Terraining Men: The Oathsworn Ruined Tower

Almost a month has swept past with no new minis painted because life.

With my 3D printer currently clogging up every time I try to print and now in stasis awaiting a new nozzle, I thought it might be time to get some terrain done and dusted.

We start with somthing that is not 3d printed, but has been sitting around taking up space on my to-do shelved.

The husband and wife-run company Oathsworn Miniatures have been doing kickstarter after kickstarter, many of which include the option of pledging for some ace resing terrain made and hand cast by the lovely and talented Jo.

In their secoond Burrows and Badgers KS “FreeLances”, the main resin bits were a three part ruined bell tower:

  

The main piece is about 20cms long, the ruined bits of wall and cracked bell-pieces are about 15cms long.

 

There were also some strip-shaped pieces with barrels and chests and such in this KS, but those are for another day.

 

Ruined Tower scatter terrain

Oathworn Miniatures,

from their Burrows and Badgers FreeLances KS

sculpted by Jo Lovejoy

Cast in resin

 

bonus:


30mm base. about 50mm tall.

This is a piece from Axolote’s recent 3d KS that I printed as a test. It is actually a part to put on top of a cave dungeon tile, it has a butterfly-shaped hole underneath to match a stud on the tiles. I selected this for printing both to test the Axolote file and my printer that has started to clog up more often. It printed well enough, I think I printed it at .01 mm layer height.

At any rate, I had it lying about when I painted the bell tower parts, and used some of the leftover paint on my palette to paint it, as it would be useful to see what the 3D printed piece would look like when drybrushed.

For one thing, the print lines did become more prononced. Still I dont really think the print lines matter much because they are only really noticeable when viewed close up. And pictures being rather in-your-face close up do make the lines look much worse than they are.

At any rate, one lesson to take from this is to go easy on drybrushing 3d printed items to not make the print lines more pronounced.

The rocky pillar-thing

Axolote Tiles Nature Set 3d print files KS

by Axolote Gaming

 

 

Painted so far this month: 4 / 30. Just 26 to go! (plus 10 still to do from last month) 

Painted so far this year: 89 / 365. Just 276 to go!

 

 

 

Prepping the days away

For the most part, the last couple of weeks have been spent doing prepwork:

The Dungeon Saga minis are now undercoated and ready for some brush action

160209 dungeon saga prep

a bunch of Mantic restic kits from the Kings of War kickstarters. God, these take AGES to prep what with the gazillion small pieces, all the big mould lines and properties of the restic itself, the mouldlines not wanting to be scraped off at all.

160209 restic hell

so best to get them done once and for all. Some Trolls, Lesser Obsidian Golems, Goblin Fleabag riders, Dwarf Brock Riders and resin Earth Elemental. Just needing some primer and a bit of basing.

Still have a bunch of different restic units from the first KS sitting in their little bags until the day I can be botheres to prep them. This lot has turned me off the restic prepwork for a while!

 

160209 burrows & badgers 2 KS

Burrows and Badgers: Freelancers (the full set from the second B&B KS, with resin terrain.) And what a great set of terrain it is! I will go more into these when I get around to painting them.

 

 

Unfinished business, or: the remainder of the 2015 painting output.

This being a belated catch-up post to round off last year with what I managed to squeeze in the last days of 2015:

So…after 100+ hours travelling the Commonwealth and murdering almost every one and every thing I come across, playing the main quest to several different conclusions… I have at last managed to put Fallout 4 down and no longer play it as compulsively as I did most of December. Now all I need to do is to not start over now that I know what is useful and what is not in the game…

Which means I got to round off 2015 with some more hastily painted minis!

 

First, something hot:

151231 BnB fire

The Campsite Fire from Oathsworn Heroes KS resin scatter terrain, (I need to say that it looks much better IRL, with more sculpted detail than is apparent in the photo).

151231 reaper fire

77080: Wall of Fire from Reaper Bones KS2. This piece is made in orange coloured transparent Bones PVC.

Obviously, I still struggle with fire.

Oh well, I still have a few more of the transparent Bones to practice with.

Both on 30mm Bases. The Oathsworn one is integral.

next up are the DreadBall Xtreme Scoring Posts (or whatever they are called)

151231 dreadball scoring posts

These are the goals in DreadBall Xtreme. They are seperate pieces because of the varying pitch layouts you can have in the game.

Yes, they are rather simply painted, I just had the need to get these off the shelf.

 

I still have a ton of other bits like crates and barrels from that game to do whenever I get around to it, not to mention similar bits from DeadZone.

DreadBall Xtreme Scoring Posts
From the DreadBall Xtreme basic game set

Dreadball Hex bases
HIPS plastic.

Reaper Bones Shadow

151231 purple bansheeb 151231 purple banshee

Another experiment on a transparent Bones. this time the 77369: Shadow.

This one is transparent Purple and I tried to give it a kind of gradient with several colours, but I do not think it worked all that well. I need to put it in front of a bright light to see any of the colours.

I tried to highlight it with a careful drybrush, but that just ruined it further.

I think it might have worked much better if it was clear transparent instead of purple, since the purple is quite dark in itself.

Live and learn.

77369 Shadow

Reaper Miniatures Bones KS2
Bones PVC
30mm base

 

It Came from the 90s!

Harlequin Miniatures Lizardmen:

 

151231 Lizardmen small 151231 Lizardmen large 1 151231 Lizardmen large 2

Three old lead Lizardmen by Harlequin Miniatures round off the year. I found some in the old stash some time ago. For some reason, I really like these minis, even though they are a bit rough in the details.

Keeping it simple, done in much the same colour scheme as the Raptors I did earlier in the year. The shield on the smaller one is not the original for that model (which I could not find).

 

Lizardmen (Warriors or something like that, these minis are likely from at least two different packs)

Harlequin Miniatures

lead metal

30mm bases

 

Total painted in December: 17

 

 

So how did 2015 go?

When I started out 2015 I posted some new years resolutions:

1. Not to buy any miniatures (ebay or otherwise) apart from kickstarters unless said miniatures are funded by my own ebay sales.

I actually managed this one! I sold alot of old stuff on Ebay, and used the money from that for my outside of KS spending. There were just a few purchases from ebay, and the only store purchase was the Age of Sigmar box set. As far as I remember that is.

However…there were many kickstarters…and I think I spent a bit much. Again. But I did manage to not go bananas in the Warpath KS. Maybe I will manage to restrain myself in the pledge manager as well.  There was something I cannot quite out my finger on about that one that made me dial it down to a single dollar.

2. Paint some minis every month

Check. The Reapermini.com forum “resolutionary painting challenge” as a good help here.

3.  Try to complete a project / set of minis / squad before starting another.

I think maybe I will call this a “partial success” as I have completed many squads this year, but no complete armies and no complete game sets. Still have some Shadows of Brimstone left to do before I can say that.

I am rather flighty, and have many different projects started that really are going nowhere…So this one really never had any hope.

Total painted in 2015: 276

I don’t think that is a bad number at all. Of course, I tend towards a sloppyfast “tabletop+” finish, the + being that I go a step or two beyond block colours and I like to do the face and eyes.

 

 

I will be interesting to see what 2016 will bring!

(I just got three big boxes from three different Kickstarters -Dungeon Saga, Zombiecide Black Plague, and the last of the first Cthulhu Wars KS… so I am not lacking in things to paint!)

 

 

 

Oathsworn Scatter Terrain, part 1: Tents

Oathsworn Miniatures have made a series of resin scatter terrain pieces to go with their Dwarfs and their Burrows and Badgers Kickstarters. They have done everything by themselves, making moulds and casting at home on their dinner table, and sharing the entire process via their excellent updates.

Here are the first two bits I have done, the Burrows and Badgers Tents.

 

151123 Oathsworn Tents

Keeping it simple.

These are well made tents for the discerning adventurer, and a place for the dormouse to sleep when the teapot is needed for tea.

When all the bits are done, they will make for an interesting campsite among ruins for a furball fight.

 

Two Tents

Burrows and Badgers KS1.

Oathsworn Miniatures

Resin

Integral base

 

Painted so far this month: 7

(Yes I count these as well. Took some time to do, after all.)

Painted so far this year: 244

 

 

Oathsworn Fire Giant / Efreeti, and trying out backdrops

/fanboy gush start/

Oathsworn Miniatures have some fantastic, old school miniatures, in the style of the period when Citadel Miniatures had soul, also known as “Oldhammer”. Oathsworn is a cottage industry company, consisting of sculptor Michael  Lovejoy and his lovely and talented wife, Jo (who is learning to sculpt as we speak). With 5 or 6 successful kickstarters under their belt, great communication and behind the scenes how-its-made guides and video clips, last but not least delivering on schedule, with consistently high quality every time. I cannot recommend Oathsworn enough.

This is the kind of company I would buy almost anything from, just to support them and their work, even if I never got around to actually painting anything…something which I intend to correct in the coming months.

/fanboy gush stop/

 

First out is the Fire Giant or Efreeti.

150827 oathsworn efreet ba 150827 oathsworn efreet bb

With his asbestos loin cloth.

As you see, I am trying out some new backdrops I printed off from massive voodoo and miniarmyhugetimesink.

Yes, I see the brighter spot should have been directly behind the mini and not to the top, but in this case I chose to do it like that. Cause of the flaming sword. Yeah, right. So that’s settled then. Totally not because I am a complete noob at this. Learn from my mistakes.

 

at any rate: Which one is better?

150827 oathsworn efreet bc 150827 oathsworn efreet bd

 

Did I mention that I struggle with flames? Turns out I not only struggle with, but actively detest painting lava-like crusts as well. Hence the not so impressive paint job. I simply do not have the patience.

Which means that Balrog will be sitting around for a while before I take a stab at painting it…

Metal, 40mm base.

Painted so far this month: 34

Painted so far this year: 185